Any thoughts on what might be going on and how I might troubleshoot further? Thanks in advance. When I've used it on a mac, it works perfectly. I rarely use the UMC device, and have only plugged it in a few times over the past few days repeating the steps I described above. Setup for mic: Mic-XLR to Input 1/2, Pad pressed/depressed, Phantom power on, Gain between 50-100%ĭrivers have been installed from Behringer's website. Setup for instrument: Bass-1/4' cable to Input 1/2, INST pressed in, tried both pressed in/out for Pad, Gain between 50-100% (I've tried using my guitars, as well as multiple cables too)

I can confirm that the PC sees the device(s). I was wondering if signal was still passing, and attempted to record in my DAW (Studio One), but no signal was recorded. I also have a Behringer UMC404HD, and that is producing the same results. I also connected the hardware to a powered USB port, but still no luck. I've also tried plugging into channel 2 with the same result hooking up a condenser mic on both channels with no apparent signal either. However, I'm not getting any indication of input signal on the UMC device (no green light on 'SIG'). A high-quality powered hub might help with that.I'm attempting to use a bass plugged directly through my Behringer UMC204HD into my laptop (W10 PC). A laptop USB port might not be able to put out enough juice to run the interface. I'm using a full tower ATX desktop with a full power USB port and I've configured it to never do any power saving. Note it's important to make sure you are powering the interface correctly. And this is on a computer that is on 24x7. But that isn't very common at all (every 3 months or so maybe).

dalefromtoowoomba Author Level 1 8 points Behringer UMC-404HD Hi - My first Apple Communities post. To start the conversation again, simply ask a new question. Worse case I have to unplug and reconnect the box. Behringer UMC-404HD - Apple Community Professional Applications / MainStage Looks like no one’s replied in a while. But this doesn't happen very often, assuming you have Windows configured to use the 48khz sample rate you use for audio. Usually when this happens I hunt down every app that has the audio device open and kill it/restart it. But native Windows apps will stop being able to make sounds. Oddly enough this doesn't happen to ASIO apps (they keep working at any sample rate), they seem happy to change the sample rate. When some Windows apps change the sample rate to 44.1 things can sometimes get stuck, doesn't happen often. I'm running version 4.59.0 which I believe is the last version. There have been driver/firmware updates last year, so I'd make sure you get those. But I do have Windows configured to use 48khz just like all my ASIO projects in every daw. I'm definitely not having any driver disconnect issues. I am using a UMC204HD (the smaller version).

Behringer umc404hd not recognized mac